Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Riso SF5050 Top Searches

These results are ranked by popularity.

Error
T02 407Description: • The Paper feed tray is not in proper position. • Paper feed tray elevator motor is overloaded.
A16 525Description: • The master remains on the print drum.
T96 433Description: • The information to be set in the test mode is not set. • The relationship between values set in the test mode are not correct.
T99 181Description: • Software error
F62 956Description: • An error has occurred on RLP.

Riso SF5050 Common Errors

The most common error codes.

Error
T02 407Description: • The Paper feed tray is not in proper position. • Paper feed tray elevator motor is overloaded.
A16 525Description: • The master remains on the print drum.
T96 433Description: • The information to be set in the test mode is not set. • The relationship between values set in the test mode are not correct.
T99 181Description: • Software error
F62 956Description: • An error has occurred on RLP.
T13 221Description: • Cutter does not operate normally. • Master was not cut properly.
A16 525Description: • The master remains on the print drum.
T98 736Description: • Hardware error
T02 407Description: • The Paper feed tray is not in proper position. • Paper feed tray elevator motor is overloaded.
T96 433Description: • The information to be set in the test mode is not set. • The relationship between values set in the test mode are not correct.