These results are ranked by popularity.
| Error | |
|---|---|
| SC583-05 | Description: Fusing Guide Plate Sensor Error The error is detected when the guide plate sensor is OFF after 200 msec from the drawer lock completion. The error is not detected while the drawer set sensor is ON. |
| SC725-01 | Description: Downstream device communication error (Multi-Folding Unit) • Communication with the downstream device has established, but the device is not responding to the command sent out, even after being sent three times. • The port level of the downs |
| SC285-00 | Description: MUSIC error The results of MUSIC pattern reading failed 4 times while the machine is turned ON. Details: • When MUSIC fails 4 times while the machine is turned ON. (The count is cleared when the machine is turned OFF e.g. when entering sleep |
| SC544-00 | Description: Heating Roller Center: Overheat detection (hardware) Hardware detection of overheat condition. The thermopile (heating roller) was detected as the cause. |
| SC721-76 | Description: Drag Roller Transport/Trailing Edge Pressure Plate Lever Motor Error (Finisher SR5070/SR5080) • When the CW was rotating (return transporting), the motor driver detected an open circuit or short-circuit. (SC from the first time) • When movin |
The most common error codes.
| Error | |
|---|---|
| SC583-05 | Description: Fusing Guide Plate Sensor Error The error is detected when the guide plate sensor is OFF after 200 msec from the drawer lock completion. The error is not detected while the drawer set sensor is ON. |
| SC725-01 | Description: Downstream device communication error (Multi-Folding Unit) • Communication with the downstream device has established, but the device is not responding to the command sent out, even after being sent three times. • The port level of the downs |
| SC285-00 | Description: MUSIC error The results of MUSIC pattern reading failed 4 times while the machine is turned ON. Details: • When MUSIC fails 4 times while the machine is turned ON. (The count is cleared when the machine is turned OFF e.g. when entering sleep |
| SC544-00 | Description: Heating Roller Center: Overheat detection (hardware) Hardware detection of overheat condition. The thermopile (heating roller) was detected as the cause. |
| SC721-76 | Description: Drag Roller Transport/Trailing Edge Pressure Plate Lever Motor Error (Finisher SR5070/SR5080) • When the CW was rotating (return transporting), the motor driver detected an open circuit or short-circuit. (SC from the first time) • When movin |
| SC583-05 | Description: Fusing Guide Plate Sensor Error The error is detected when the guide plate sensor is OFF after 200 msec from the drawer lock completion. The error is not detected while the drawer set sensor is ON. |
| SC725-01 | Description: Downstream device communication error (Multi-Folding Unit) • Communication with the downstream device has established, but the device is not responding to the command sent out, even after being sent three times. • The port level of the downs |
| SC285-00 | Description: MUSIC error The results of MUSIC pattern reading failed 4 times while the machine is turned ON. Details: • When MUSIC fails 4 times while the machine is turned ON. (The count is cleared when the machine is turned OFF e.g. when entering sleep |
| SC544-00 | Description: Heating Roller Center: Overheat detection (hardware) Hardware detection of overheat condition. The thermopile (heating roller) was detected as the cause. |
| SC721-76 | Description: Drag Roller Transport/Trailing Edge Pressure Plate Lever Motor Error (Finisher SR5070/SR5080) • When the CW was rotating (return transporting), the motor driver detected an open circuit or short-circuit. (SC from the first time) • When movin |
