Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC400 Top Searches

These results are ranked by popularity.

Error
502Description: 2nd paper tray lift motor malfunction (optional paper feed unit) The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
635Description: Counter device error 4 A backup battery error was returned by the counter device.
236Description: FGATE ON error: C The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [C].
860Description: HDD: Initialization error The controller detects that the hard disk fails
541Description: Heating roller thermopile error The temperature detected by the heating roller thermopile does not reach 0°C for 6 seconds.

Ricoh MPC400 Common Errors

The most common error codes.

Error
502Description: 2nd paper tray lift motor malfunction (optional paper feed unit) The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
635Description: Counter device error 4 A backup battery error was returned by the counter device.
236Description: FGATE ON error: C The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [C].
860Description: HDD: Initialization error The controller detects that the hard disk fails
541Description: Heating roller thermopile error The temperature detected by the heating roller thermopile does not reach 0°C for 6 seconds.
236Description: FGATE ON error: C The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [C].
860Description: HDD: Initialization error The controller detects that the hard disk fails
502Description: 2nd paper tray lift motor malfunction (optional paper feed unit) The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
635Description: Counter device error 4 A backup battery error was returned by the counter device.
361Description: TD sensor (Vt high) error 1: M • The Vt value of the black, magenta, cyan, or yellow TD sensor exceeds the specified value (default: 4.7V) with SP3020-002 for twenty counts. • The [Vt - Vtref] value of the black, magenta, cyan, or yellow TD