Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC3001 Top Searches

These results are ranked by popularity.

Error
498Description: Temperature and humidity sensor error 2 • The thermistor output of the temperature sensor was not within the prescribed range (0.5V to 4.2V). • The thermistor output of the humidity sensor was not within the prescribed range (0.01V to 2.4V).
870Description: Address book error An error is detected in the data copied to the address book over a network.
581Description: IH inverter input voltage error The IH inverter detects 70 V or less/150 V or more for 10 seconds. The IH inverter detects 160 V or less/300 V or more for 10 seconds.
761Description: Finisher folder plate motor error The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
242Description: LD error: M The BICU detects LDB error a few times consecutively when LDB unit turns on after LDB initialization.

Ricoh MPC3001 Common Errors

The most common error codes.

Error
498Description: Temperature and humidity sensor error 2 • The thermistor output of the temperature sensor was not within the prescribed range (0.5V to 4.2V). • The thermistor output of the humidity sensor was not within the prescribed range (0.01V to 2.4V).
870Description: Address book error An error is detected in the data copied to the address book over a network.
581Description: IH inverter input voltage error The IH inverter detects 70 V or less/150 V or more for 10 seconds. The IH inverter detects 160 V or less/300 V or more for 10 seconds.
761Description: Finisher folder plate motor error The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
242Description: LD error: M The BICU detects LDB error a few times consecutively when LDB unit turns on after LDB initialization.
498Description: Temperature and humidity sensor error 2 • The thermistor output of the temperature sensor was not within the prescribed range (0.5V to 4.2V). • The thermistor output of the humidity sensor was not within the prescribed range (0.01V to 2.4V).
581Description: IH inverter input voltage error The IH inverter detects 70 V or less/150 V or more for 10 seconds. The IH inverter detects 160 V or less/300 V or more for 10 seconds.
761Description: Finisher folder plate motor error The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
870Description: Address book error An error is detected in the data copied to the address book over a network.
242Description: LD error: M The BICU detects LDB error a few times consecutively when LDB unit turns on after LDB initialization.