Ricoh ML325D Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh ML325D Top Searches

These results are ranked by popularity.

Error
901Description: Mechanical total counter The mechanical total counter does not work properly.
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for 1 second (detected by the fusing temperature monitor circuit).
590Description: Left exhaust fan motor error The CPU detects an exhaust fan lock signal for more than 5 seconds.
202Description: Polygon Motor Error 1: ON Timeout The machine does not detect the polygon motor lock signal for 10 seconds after the polygon motor has turned on.
750Description: Output tray motor error The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. • The machine does not detect correctly the position of the output tray when the output tray motor starts to rotate.

Ricoh ML325D Common Errors

The most common error codes.

Error
901Description: Mechanical total counter The mechanical total counter does not work properly.
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for 1 second (detected by the fusing temperature monitor circuit).
590Description: Left exhaust fan motor error The CPU detects an exhaust fan lock signal for more than 5 seconds.
202Description: Polygon Motor Error 1: ON Timeout The machine does not detect the polygon motor lock signal for 10 seconds after the polygon motor has turned on.
750Description: Output tray motor error The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. • The machine does not detect correctly the position of the output tray when the output tray motor starts to rotate.
901Description: Mechanical total counter The mechanical total counter does not work properly.
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for 1 second (detected by the fusing temperature monitor circuit).
590Description: Left exhaust fan motor error The CPU detects an exhaust fan lock signal for more than 5 seconds.
202Description: Polygon Motor Error 1: ON Timeout The machine does not detect the polygon motor lock signal for 10 seconds after the polygon motor has turned on.
750Description: Output tray motor error The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. • The machine does not detect correctly the position of the output tray when the output tray motor starts to rotate.