Ricoh Aficio 350 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 350 Top Searches

These results are ranked by popularity.

Error
SC701Description: ADF original pick-up malfunction The original pick-up H.P sensor does not activate three times consecutively after the pick-up motor has turned on.
SC492Description: Cooling fan motor lock A cooling fan motor lock signal is not detected within 5 seconds after the cooling fan motor turns on.
SC955Description: Memory setting error The settings that are required for image processing using the memory are not sent from the IPU.
SC507Description: LCT main motor lock (optional LCT) A main motor lock signal is detected for more than 0.5 s during rotation.
SC326Description: 2nd laser synchronization error The 2nd laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.

Ricoh Aficio 350 Common Errors

The most common error codes.

Error
SC701Description: ADF original pick-up malfunction The original pick-up H.P sensor does not activate three times consecutively after the pick-up motor has turned on.
SC492Description: Cooling fan motor lock A cooling fan motor lock signal is not detected within 5 seconds after the cooling fan motor turns on.
SC955Description: Memory setting error The settings that are required for image processing using the memory are not sent from the IPU.
SC507Description: LCT main motor lock (optional LCT) A main motor lock signal is detected for more than 0.5 s during rotation.
SC326Description: 2nd laser synchronization error The 2nd laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.
SC701Description: ADF original pick-up malfunction The original pick-up H.P sensor does not activate three times consecutively after the pick-up motor has turned on.
SC492Description: Cooling fan motor lock A cooling fan motor lock signal is not detected within 5 seconds after the cooling fan motor turns on.
SC955Description: Memory setting error The settings that are required for image processing using the memory are not sent from the IPU.
SC507Description: LCT main motor lock (optional LCT) A main motor lock signal is detected for more than 0.5 s during rotation.
SC326Description: 2nd laser synchronization error The 2nd laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.