These results are ranked by popularity.
Error | |
---|---|
402 | Description: DCN was returned from receiver while transmitter is waiting for NSF/DIS. |
494 | Description: Interval between two EOLs was more than 10 sec. when receiver received message data. |
007 | Description: 1. Leading edge of the recording paper fails to reach the Paper Exit Sensor. 2. Recording paper has not completely passed the Paper Exit Sensor. |
543 | Description: T5 timer (60 sec.) elapsed without MCF. |
414 | Description: No response received after transmitting 3rd NSC. |
The most common error codes.
Error | |
---|---|
402 | Description: DCN was returned from receiver while transmitter is waiting for NSF/DIS. |
494 | Description: Interval between two EOLs was more than 10 sec. when receiver received message data. |
007 | Description: 1. Leading edge of the recording paper fails to reach the Paper Exit Sensor. 2. Recording paper has not completely passed the Paper Exit Sensor. |
543 | Description: T5 timer (60 sec.) elapsed without MCF. |
414 | Description: No response received after transmitting 3rd NSC. |
402 | Description: DCN was returned from receiver while transmitter is waiting for NSF/DIS. |
494 | Description: Interval between two EOLs was more than 10 sec. when receiver received message data. |
007 | Description: 1. Leading edge of the recording paper fails to reach the Paper Exit Sensor. 2. Recording paper has not completely passed the Paper Exit Sensor. |
543 | Description: T5 timer (60 sec.) elapsed without MCF. |
414 | Description: No response received after transmitting 3rd NSC. |