These results are ranked by popularity.
Error | |
---|---|
J70 | Description: Read Point Sensor does not go ON within 10 seconds after the original starts feeding. (Information Code 030 is printed on the Transaction Journal instead.) |
U13 | Description: 1. Toner Cartridge is incorrectly installed. 2. Low Toner. 3. Toner Sensor is disconnected. 4. Toner Sensor is defective. 5. Engine PCB connector is disconnected. 6. Engine PCB is defective. |
E4-10 | Description: Exhaust Fan Motor Rotation (Fuser Unit Side) |
J71 | Description: Original was longer than 78.7 in (2m). (Information Code 031 or 032 is printed on the Transaction Journal instead.) |
U16 | Description: 1. No Toner Cartridge. |
The most common error codes.
Error | |
---|---|
J70 | Description: Read Point Sensor does not go ON within 10 seconds after the original starts feeding. (Information Code 030 is printed on the Transaction Journal instead.) |
U13 | Description: 1. Toner Cartridge is incorrectly installed. 2. Low Toner. 3. Toner Sensor is disconnected. 4. Toner Sensor is defective. 5. Engine PCB connector is disconnected. 6. Engine PCB is defective. |
E4-10 | Description: Exhaust Fan Motor Rotation (Fuser Unit Side) |
J71 | Description: Original was longer than 78.7 in (2m). (Information Code 031 or 032 is printed on the Transaction Journal instead.) |
U16 | Description: 1. No Toner Cartridge. |
J70 | Description: Read Point Sensor does not go ON within 10 seconds after the original starts feeding. (Information Code 030 is printed on the Transaction Journal instead.) |
U13 | Description: 1. Toner Cartridge is incorrectly installed. 2. Low Toner. 3. Toner Sensor is disconnected. 4. Toner Sensor is defective. 5. Engine PCB connector is disconnected. 6. Engine PCB is defective. |
E4-10 | Description: Exhaust Fan Motor Rotation (Fuser Unit Side) |
J71 | Description: Original was longer than 78.7 in (2m). (Information Code 031 or 032 is printed on the Transaction Journal instead.) |
U16 | Description: 1. No Toner Cartridge. |