These results are ranked by popularity.
| Error | |
|---|---|
| E1-33 | Description: CCD offset adjustment failure Fail to adjust the CCD offset. |
| J33 | Description: The registration roller paper pass sensor still remains ON. (Jam remains) |
| E5-18 | Description: Shading adjustment error An error occurs when adjusting the shading (black or white). |
| E5-74 | Description: GA#1 ? SRAM access failure GA#1 ? built-in SRAM error |
| E3-10 | Description: High voltage power supply leak Detect the HVPS leak for charging. |
The most common error codes.
| Error | |
|---|---|
| E1-33 | Description: CCD offset adjustment failure Fail to adjust the CCD offset. |
| J33 | Description: The registration roller paper pass sensor still remains ON. (Jam remains) |
| E5-18 | Description: Shading adjustment error An error occurs when adjusting the shading (black or white). |
| E5-74 | Description: GA#1 ? SRAM access failure GA#1 ? built-in SRAM error |
| E3-10 | Description: High voltage power supply leak Detect the HVPS leak for charging. |
| E1-33 | Description: CCD offset adjustment failure Fail to adjust the CCD offset. |
| J33 | Description: The registration roller paper pass sensor still remains ON. (Jam remains) |
| E5-18 | Description: Shading adjustment error An error occurs when adjusting the shading (black or white). |
| E5-74 | Description: GA#1 ? SRAM access failure GA#1 ? built-in SRAM error |
| E3-10 | Description: High voltage power supply leak Detect the HVPS leak for charging. |
