Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


OKI MPS5500mb Top Searches

These results are ranked by popularity.

Error
920.06Description: Fuser warm-up failure Fuser type = 1 The fuser hot roll temperature does not increase while the lamp is turned on.
925.52Description: Incorrect fuser or fuser lamp detected. Fuser type = 1 Fuser page count has exceeded life. The machine detected a 115 V lamp in a 220 V machine. The fuser lamp has an excessive wattage rating.
911.00Description: Pick arm motor overrun failure The pick arm motor encoder continues to detect pulse after the motor stops.
922.81Description: Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. The fuser hot roll did not reach operating temperature within new enhanced control.
924.01Description: Open fuser thermistor check failure. Fuser type = 1 The fuser thermistor has failed.

OKI MPS5500mb Common Errors

The most common error codes.

Error
920.06Description: Fuser warm-up failure Fuser type = 1 The fuser hot roll temperature does not increase while the lamp is turned on.
925.52Description: Incorrect fuser or fuser lamp detected. Fuser type = 1 Fuser page count has exceeded life. The machine detected a 115 V lamp in a 220 V machine. The fuser lamp has an excessive wattage rating.
911.00Description: Pick arm motor overrun failure The pick arm motor encoder continues to detect pulse after the motor stops.
922.81Description: Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. The fuser hot roll did not reach operating temperature within new enhanced control.
924.01Description: Open fuser thermistor check failure. Fuser type = 1 The fuser thermistor has failed.
920.06Description: Fuser warm-up failure Fuser type = 1 The fuser hot roll temperature does not increase while the lamp is turned on.
925.52Description: Incorrect fuser or fuser lamp detected. Fuser type = 1 Fuser page count has exceeded life. The machine detected a 115 V lamp in a 220 V machine. The fuser lamp has an excessive wattage rating.
911.00Description: Pick arm motor overrun failure The pick arm motor encoder continues to detect pulse after the motor stops.
922.81Description: Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. The fuser hot roll did not reach operating temperature within new enhanced control.
924.01Description: Open fuser thermistor check failure. Fuser type = 1 The fuser thermistor has failed.