These results are ranked by popularity.
| Error | |
|---|---|
| C5A6 | Description: Tray4 Software Error |
| E715 | Description: ADF document jam Activation of the hopping sensor at document reversal – The hopping sensor becomes active when the reverse paper sensor is inactive. Multifeed of documents is detected. (Duplex) |
| C37A ... C37D | Description: Abnormal temperature of belt C37A: Shortcircuit C37B: Open circuit C37C: High temperature C37D: Low temperature |
| E870 | Description: ADF document jam ADF open jam – A document jam is caused by opening of the ADF while the RADF is operating. |
| E01B | Description: Occur jam around Fuser Unit |
The most common error codes.
| Error | |
|---|---|
| C5A6 | Description: Tray4 Software Error |
| E715 | Description: ADF document jam Activation of the hopping sensor at document reversal – The hopping sensor becomes active when the reverse paper sensor is inactive. Multifeed of documents is detected. (Duplex) |
| C37A ... C37D | Description: Abnormal temperature of belt C37A: Shortcircuit C37B: Open circuit C37C: High temperature C37D: Low temperature |
| E870 | Description: ADF document jam ADF open jam – A document jam is caused by opening of the ADF while the RADF is operating. |
| E01B | Description: Occur jam around Fuser Unit |
| E715 | Description: ADF document jam Activation of the hopping sensor at document reversal – The hopping sensor becomes active when the reverse paper sensor is inactive. Multifeed of documents is detected. (Duplex) |
| C5A6 | Description: Tray4 Software Error |
| E01B | Description: Occur jam around Fuser Unit |
| C37A ... C37D | Description: Abnormal temperature of belt C37A: Shortcircuit C37B: Open circuit C37C: High temperature C37D: Low temperature |
| E870 | Description: ADF document jam ADF open jam – A document jam is caused by opening of the ADF while the RADF is operating. |
