These results are ranked by popularity.
| Error | |
|---|---|
| 0092 | Description: Transfer belt rotation failure • The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is |
| 13DD | Description: Backup data error • The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON. |
| 0094 | Description: 2nd image transfer pressure /retraction failure • The state of the 2nd image transfer retraction position sensor is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. • Th |
| 13E2 | Description: Flash ROM write error • Flash ROM writing is found faulty during a check. |
| 0300 | Description: Polygon motor malfunction • A LOW motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period |
The most common error codes.
| Error | |
|---|---|
| 0092 | Description: Transfer belt rotation failure • The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is |
| 13DD | Description: Backup data error • The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON. |
| 0094 | Description: 2nd image transfer pressure /retraction failure • The state of the 2nd image transfer retraction position sensor is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. • Th |
| 13E2 | Description: Flash ROM write error • Flash ROM writing is found faulty during a check. |
| 0300 | Description: Polygon motor malfunction • A LOW motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period |
| 0092 | Description: Transfer belt rotation failure • The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is |
| 13DD | Description: Backup data error • The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON. |
| 0094 | Description: 2nd image transfer pressure /retraction failure • The state of the 2nd image transfer retraction position sensor is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. • Th |
| 13E2 | Description: Flash ROM write error • Flash ROM writing is found faulty during a check. |
| 0300 | Description: Polygon motor malfunction • A LOW motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period |
