OKI B8300n Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


OKI B8300n Top Searches

These results are ranked by popularity.

Error
H3 01, H3 HL2Description: Fusing section high temperature trouble. The fusing temperature exceeds 242°C. (An input voltage of 0.27V or above is detected.)
F1 19Description: Console finisher (AR-FN7) front alignment motor trouble. Front alignment motor operation abnormality
U2 00Description: EEPROM read/write error (Controller). EEPROM write error
F1 36Description: Console finisher (AR-FN7) punch (AR-PN1) timing sensor trouble. Sensor input value abnormality
F1 00Description: Mail-bin stacker (AR-MS1) communication trouble. Communication cable test error after turning on the power or exiting from DIAG. Communication error with the Mail-bin stacker.

OKI B8300n Common Errors

The most common error codes.

Error
H3 01, H3 HL2Description: Fusing section high temperature trouble. The fusing temperature exceeds 242°C. (An input voltage of 0.27V or above is detected.)
F1 19Description: Console finisher (AR-FN7) front alignment motor trouble. Front alignment motor operation abnormality
U2 00Description: EEPROM read/write error (Controller). EEPROM write error
F1 36Description: Console finisher (AR-FN7) punch (AR-PN1) timing sensor trouble. Sensor input value abnormality
F1 00Description: Mail-bin stacker (AR-MS1) communication trouble. Communication cable test error after turning on the power or exiting from DIAG. Communication error with the Mail-bin stacker.
H3 01, H3 HL2Description: Fusing section high temperature trouble. The fusing temperature exceeds 242°C. (An input voltage of 0.27V or above is detected.)
F1 19Description: Console finisher (AR-FN7) front alignment motor trouble. Front alignment motor operation abnormality
U2 00Description: EEPROM read/write error (Controller). EEPROM write error
F1 36Description: Console finisher (AR-FN7) punch (AR-PN1) timing sensor trouble. Sensor input value abnormality
F1 00Description: Mail-bin stacker (AR-MS1) communication trouble. Communication cable test error after turning on the power or exiting from DIAG. Communication error with the Mail-bin stacker.