These results are ranked by popularity.
| Error | |
|---|---|
| 202.13 | Description: The media is late reaching the sensor (fuser exit) within the specified time |
| 121.32...121.49 | Description: 121.32 Open fuser main thermistor 121.33 Open fuser edge thermistor 121.34 Open fuser backup roll thermistor 121.37 Fuser heated faster than allowed during line voltage detection (115V fuser in 220V machine) 121.48 Fuser Hardware type does n |
| 940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
| 32.10 | Description: Toner cartridge smart chip compatibility error |
| 200.01, 200.02 | Description: 200.01 Media remains on the sensor (input) during the warm.up sequence. 200.02 Media reached the sensor (input) sooner than the specified time. The wrong config ID causes the engine to assume a 550 paper path on a 250 model. |
The most common error codes.
| Error | |
|---|---|
| 202.13 | Description: The media is late reaching the sensor (fuser exit) within the specified time |
| 121.32...121.49 | Description: 121.32 Open fuser main thermistor 121.33 Open fuser edge thermistor 121.34 Open fuser backup roll thermistor 121.37 Fuser heated faster than allowed during line voltage detection (115V fuser in 220V machine) 121.48 Fuser Hardware type does n |
| 940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
| 32.10 | Description: Toner cartridge smart chip compatibility error |
| 200.01, 200.02 | Description: 200.01 Media remains on the sensor (input) during the warm.up sequence. 200.02 Media reached the sensor (input) sooner than the specified time. The wrong config ID causes the engine to assume a 550 paper path on a 250 model. |
| 202.13 | Description: The media is late reaching the sensor (fuser exit) within the specified time |
| 121.32...121.49 | Description: 121.32 Open fuser main thermistor 121.33 Open fuser edge thermistor 121.34 Open fuser backup roll thermistor 121.37 Fuser heated faster than allowed during line voltage detection (115V fuser in 220V machine) 121.48 Fuser Hardware type does n |
| 940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
| 32.10 | Description: Toner cartridge smart chip compatibility error |
| 200.01, 200.02 | Description: 200.01 Media remains on the sensor (input) during the warm.up sequence. 200.02 Media reached the sensor (input) sooner than the specified time. The wrong config ID causes the engine to assume a 550 paper path on a 250 model. |
