These results are ranked by popularity.
Error | |
---|---|
59 | Description: Incompatible output bin/tray |
282.01 | Description: Media remains on the sensor (ADF pick) during the warm-up sequence or at POR. |
200.15 | Description: Media reached the sensor (input) but did not clear it within the specified time. (Media source = Tray 1) |
31.21...31.45 | Description: 31.21 Toner Level Sensing reading out of range 31.22 Excessive toner sensing line noise 31.23 Abrupt change detected in toner sensing reading 31.25 Toner level sensing calibration capacitor reading too low 31.40 Toner cartridge smart chip er |
202.01 | Description: Media remains on the sensor (fuser exit) during the warm.up sequence |
The most common error codes.
Error | |
---|---|
59 | Description: Incompatible output bin/tray |
282.01 | Description: Media remains on the sensor (ADF pick) during the warm-up sequence or at POR. |
200.15 | Description: Media reached the sensor (input) but did not clear it within the specified time. (Media source = Tray 1) |
31.21...31.45 | Description: 31.21 Toner Level Sensing reading out of range 31.22 Excessive toner sensing line noise 31.23 Abrupt change detected in toner sensing reading 31.25 Toner level sensing calibration capacitor reading too low 31.40 Toner cartridge smart chip er |
202.01 | Description: Media remains on the sensor (fuser exit) during the warm.up sequence |
59 | Description: Incompatible output bin/tray |
282.01 | Description: Media remains on the sensor (ADF pick) during the warm-up sequence or at POR. |
200.15 | Description: Media reached the sensor (input) but did not clear it within the specified time. (Media source = Tray 1) |
31.21...31.45 | Description: 31.21 Toner Level Sensing reading out of range 31.22 Excessive toner sensing line noise 31.23 Abrupt change detected in toner sensing reading 31.25 Toner level sensing calibration capacitor reading too low 31.40 Toner cartridge smart chip er |
202.01 | Description: Media remains on the sensor (fuser exit) during the warm.up sequence |