Lexmark XM5170 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark XM5170 Top Searches

These results are ranked by popularity.

Error
959.01, 959.02, 959.03Description: 959.01 Controller verification failure of smart chip boot code 959.02 Failure to authenticate Signature Verification Code 959.03 Signature Verification Code failed to authenticate a code partition
51Description: Defective flash—this error may occur at power on, or during flash format and write operations
230.02, 230.03Description: 230.02 The media reached the sensor (duplex path) sooner than the specified time 230.03 The media is late reaching the sensor (duplex path) within the specified time
200.03Description: Media is late reaching the sensor (input) within the specified time.
840.02Description: The controller has automatically disabled the flatbed scanner and ADF after two consecutive hardware failures.

Lexmark XM5170 Common Errors

The most common error codes.

Error
959.01, 959.02, 959.03Description: 959.01 Controller verification failure of smart chip boot code 959.02 Failure to authenticate Signature Verification Code 959.03 Signature Verification Code failed to authenticate a code partition
51Description: Defective flash—this error may occur at power on, or during flash format and write operations
230.02, 230.03Description: 230.02 The media reached the sensor (duplex path) sooner than the specified time 230.03 The media is late reaching the sensor (duplex path) within the specified time
200.03Description: Media is late reaching the sensor (input) within the specified time.
840.02Description: The controller has automatically disabled the flatbed scanner and ADF after two consecutive hardware failures.
959.01, 959.02, 959.03Description: 959.01 Controller verification failure of smart chip boot code 959.02 Failure to authenticate Signature Verification Code 959.03 Signature Verification Code failed to authenticate a code partition
51Description: Defective flash—this error may occur at power on, or during flash format and write operations
230.02, 230.03Description: 230.02 The media reached the sensor (duplex path) sooner than the specified time 230.03 The media is late reaching the sensor (duplex path) within the specified time
200.03Description: Media is late reaching the sensor (input) within the specified time.
840.02Description: The controller has automatically disabled the flatbed scanner and ADF after two consecutive hardware failures.