These results are ranked by popularity.
Error | |
---|---|
900.xx | Description: Service RIP Software Unrecoverable RIP software error/illegal trap. |
242.01...244.49 | Description: 242.01 Paper over tray 2 pass thru sensor on warmup. 242.02 Input sensor detected late feed during a pick retry from tray 2. 242.03 Tray 2 pass thru sensor never became covered when feeding a sheet from an option below. 242.06 Failed to feed |
111.00...111.69 | Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope |
958.xx | Description: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections. |
324.57, 324.58, 324.59. | Description: 324.57 Motor 3 motor no first encoder 324.58 Motor 3 motor stop error 324.59 Motor 3 PWM underflow (motor overspeed) |
The most common error codes.
Error | |
---|---|
900.xx | Description: Service RIP Software Unrecoverable RIP software error/illegal trap. |
242.01...244.49 | Description: 242.01 Paper over tray 2 pass thru sensor on warmup. 242.02 Input sensor detected late feed during a pick retry from tray 2. 242.03 Tray 2 pass thru sensor never became covered when feeding a sheet from an option below. 242.06 Failed to feed |
111.00...111.69 | Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope |
958.xx | Description: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections. |
324.57, 324.58, 324.59. | Description: 324.57 Motor 3 motor no first encoder 324.58 Motor 3 motor stop error 324.59 Motor 3 PWM underflow (motor overspeed) |
900.xx | Description: Service RIP Software Unrecoverable RIP software error/illegal trap. |
242.01...244.49 | Description: 242.01 Paper over tray 2 pass thru sensor on warmup. 242.02 Input sensor detected late feed during a pick retry from tray 2. 242.03 Tray 2 pass thru sensor never became covered when feeding a sheet from an option below. 242.06 Failed to feed |
111.00...111.69 | Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope |
958.xx | Description: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections. |
324.57, 324.58, 324.59. | Description: 324.57 Motor 3 motor no first encoder 324.58 Motor 3 motor stop error 324.59 Motor 3 PWM underflow (motor overspeed) |