Lexmark XC8160dte Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark XC8160dte Top Searches

These results are ranked by popularity.

Error
231.x5Description: 231.05 Paper fed from the MPF never cleared the sensor (duplex path 2). 231.15 Paper fed from tray 1 never cleared the sensor (duplex path 2). 231.25 Paper fed from tray 2 never cleared the sensor (duplex path 2). 231.35 Paper fed from tray
147.80...147.85Description: 147.80 The motor (deskew) did not turn on. 147.81 The motor (deskew) did not turn off. 147.82 The motor (deskew) speed did not ramp up to the required level. 147.83 The motor (deskew) stalled. 147.84 The motor (deskew) ran too slow. 147.85 T
200.16Description: 200.16 Paper fed from tray 1 was picked but it never arrived at the sensor (input).
53Description: The flash memory is unformatted.
280.11Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on.

Lexmark XC8160dte Common Errors

The most common error codes.

Error
231.x5Description: 231.05 Paper fed from the MPF never cleared the sensor (duplex path 2). 231.15 Paper fed from tray 1 never cleared the sensor (duplex path 2). 231.25 Paper fed from tray 2 never cleared the sensor (duplex path 2). 231.35 Paper fed from tray
147.80...147.85Description: 147.80 The motor (deskew) did not turn on. 147.81 The motor (deskew) did not turn off. 147.82 The motor (deskew) speed did not ramp up to the required level. 147.83 The motor (deskew) stalled. 147.84 The motor (deskew) ran too slow. 147.85 T
200.16Description: 200.16 Paper fed from tray 1 was picked but it never arrived at the sensor (input).
53Description: The flash memory is unformatted.
280.11Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on.
231.x5Description: 231.05 Paper fed from the MPF never cleared the sensor (duplex path 2). 231.15 Paper fed from tray 1 never cleared the sensor (duplex path 2). 231.25 Paper fed from tray 2 never cleared the sensor (duplex path 2). 231.35 Paper fed from tray
147.80...147.85Description: 147.80 The motor (deskew) did not turn on. 147.81 The motor (deskew) did not turn off. 147.82 The motor (deskew) speed did not ramp up to the required level. 147.83 The motor (deskew) stalled. 147.84 The motor (deskew) ran too slow. 147.85 T
200.16Description: 200.16 Paper fed from tray 1 was picked but it never arrived at the sensor (input).
53Description: The flash memory is unformatted.
280.11Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on.