These results are ranked by popularity.
| Error | |
|---|---|
| 284.11 | Description: Paper remains detected at the sensor (ADF 2nd scan) after the printer is turned on. |
| 232.x4 | Description: 232.04 Paper fed from the MPF cleared the sensor (input) earlier than expected during a duplex print job. 232.14 Paper fed from tray 1 cleared the sensor (input) earlier than expected during a duplex print job. 232.24 Paper fed from tray 2 c |
| 200.91 | Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on. |
| 900.xx | Description: RIP firmware errors |
| 126.06 | Description: LVPS 25V line error was detected. |
The most common error codes.
| Error | |
|---|---|
| 284.11 | Description: Paper remains detected at the sensor (ADF 2nd scan) after the printer is turned on. |
| 232.x4 | Description: 232.04 Paper fed from the MPF cleared the sensor (input) earlier than expected during a duplex print job. 232.14 Paper fed from tray 1 cleared the sensor (input) earlier than expected during a duplex print job. 232.24 Paper fed from tray 2 c |
| 200.91 | Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on. |
| 900.xx | Description: RIP firmware errors |
| 126.06 | Description: LVPS 25V line error was detected. |
| 284.11 | Description: Paper remains detected at the sensor (ADF 2nd scan) after the printer is turned on. |
| 232.x4 | Description: 232.04 Paper fed from the MPF cleared the sensor (input) earlier than expected during a duplex print job. 232.14 Paper fed from tray 1 cleared the sensor (input) earlier than expected during a duplex print job. 232.24 Paper fed from tray 2 c |
| 200.91 | Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on. |
| 900.xx | Description: RIP firmware errors |
| 126.06 | Description: LVPS 25V line error was detected. |
