Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark XC8155dte Top Searches

These results are ranked by popularity.

Error
126.06Description: LVPS 25V line error was detected.
422.13, 422.15Description: 422.13 The sensor (staple finisher rear tamper home) was not covered at the specified time. 422.15 The sensor (staple finisher rear tamper home) was not cleared within the specified time.
284.11Description: Paper remains detected at the sensor (ADF 2nd scan) after the printer is turned on.
232.x4Description: 232.04 Paper fed from the MPF cleared the sensor (input) earlier than expected during a duplex print job. 232.14 Paper fed from tray 1 cleared the sensor (input) earlier than expected during a duplex print job. 232.24 Paper fed from tray 2 c
200.91Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on.

Lexmark XC8155dte Common Errors

The most common error codes.

Error
126.06Description: LVPS 25V line error was detected.
422.13, 422.15Description: 422.13 The sensor (staple finisher rear tamper home) was not covered at the specified time. 422.15 The sensor (staple finisher rear tamper home) was not cleared within the specified time.
284.11Description: Paper remains detected at the sensor (ADF 2nd scan) after the printer is turned on.
232.x4Description: 232.04 Paper fed from the MPF cleared the sensor (input) earlier than expected during a duplex print job. 232.14 Paper fed from tray 1 cleared the sensor (input) earlier than expected during a duplex print job. 232.24 Paper fed from tray 2 c
200.91Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on.
126.06Description: LVPS 25V line error was detected.
422.13, 422.15Description: 422.13 The sensor (staple finisher rear tamper home) was not covered at the specified time. 422.15 The sensor (staple finisher rear tamper home) was not cleared within the specified time.
284.11Description: Paper remains detected at the sensor (ADF 2nd scan) after the printer is turned on.
232.x4Description: 232.04 Paper fed from the MPF cleared the sensor (input) earlier than expected during a duplex print job. 232.14 Paper fed from tray 1 cleared the sensor (input) earlier than expected during a duplex print job. 232.24 Paper fed from tray 2 c
200.91Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on.