These results are ranked by popularity.
| Error | |
|---|---|
| 149.80...149.85 | Description: 149.80 The motor (redrive) did not turn on. 149.81 The motor (redrive) did not turn off. 149.82 The motor (redrive) speed did not ramp up to the required level. 149.83 The motor (redrive) stalled. 149.84 The motor (redrive) ran too slow. 149 |
| 51 | Description: The flash memory is defective. |
| 360.60, 360.61 | Description: 360.60 The motor (mid.transport) did not turn on. 360.61 The motor (mid.transport) did not turn off. |
| 243.83, 243.84 | Description: 243.83 The motor (tray 3 pick) has stalled. 243.84 The motor (tray 3 pick) has stalled. |
| 212.91 | Description: Paper remains detected at the sensor (deskew roller entry) after the printer is turned on. |
The most common error codes.
| Error | |
|---|---|
| 149.80...149.85 | Description: 149.80 The motor (redrive) did not turn on. 149.81 The motor (redrive) did not turn off. 149.82 The motor (redrive) speed did not ramp up to the required level. 149.83 The motor (redrive) stalled. 149.84 The motor (redrive) ran too slow. 149 |
| 51 | Description: The flash memory is defective. |
| 360.60, 360.61 | Description: 360.60 The motor (mid.transport) did not turn on. 360.61 The motor (mid.transport) did not turn off. |
| 243.83, 243.84 | Description: 243.83 The motor (tray 3 pick) has stalled. 243.84 The motor (tray 3 pick) has stalled. |
| 212.91 | Description: Paper remains detected at the sensor (deskew roller entry) after the printer is turned on. |
| 149.80...149.85 | Description: 149.80 The motor (redrive) did not turn on. 149.81 The motor (redrive) did not turn off. 149.82 The motor (redrive) speed did not ramp up to the required level. 149.83 The motor (redrive) stalled. 149.84 The motor (redrive) ran too slow. 149 |
| 51 | Description: The flash memory is defective. |
| 360.60, 360.61 | Description: 360.60 The motor (mid.transport) did not turn on. 360.61 The motor (mid.transport) did not turn off. |
| 243.83, 243.84 | Description: 243.83 The motor (tray 3 pick) has stalled. 243.84 The motor (tray 3 pick) has stalled. |
| 212.91 | Description: Paper remains detected at the sensor (deskew roller entry) after the printer is turned on. |
