Lexmark XC8155 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark XC8155 Top Searches

These results are ranked by popularity.

Error
422.13, 422.15Description: 422.13 The sensor (staple finisher rear tamper home) was not covered at the specified time. 422.15 The sensor (staple finisher rear tamper home) was not cleared within the specified time.
85Description: A developer unit end of life error was detected: • The developer unit life is low, nearly low, or very low. • The developer unit needs to be replaced.
172.80...172.85Description: 172.80 The LVPS fan did not turn on. 172.81 The LVPS fan did not turn off. 172.82 The LVPS fan speed did not ramp up to the required level. 172.83 The LVPS fan stalled. 172.84 The LVPS fan ran too slow. 172.85 The LVPS fan ran too fast.
243.x6Description: 243.46 Paper fed from tray 4 was picked but it never arrived at the sensor (tray 3 passthrough). 243.96 Paper was picked but it never arrived at the sensor (tray 3 pass-through). Paper source is undetermined.
200.91Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on.

Lexmark XC8155 Common Errors

The most common error codes.

Error
422.13, 422.15Description: 422.13 The sensor (staple finisher rear tamper home) was not covered at the specified time. 422.15 The sensor (staple finisher rear tamper home) was not cleared within the specified time.
85Description: A developer unit end of life error was detected: • The developer unit life is low, nearly low, or very low. • The developer unit needs to be replaced.
172.80...172.85Description: 172.80 The LVPS fan did not turn on. 172.81 The LVPS fan did not turn off. 172.82 The LVPS fan speed did not ramp up to the required level. 172.83 The LVPS fan stalled. 172.84 The LVPS fan ran too slow. 172.85 The LVPS fan ran too fast.
243.x6Description: 243.46 Paper fed from tray 4 was picked but it never arrived at the sensor (tray 3 passthrough). 243.96 Paper was picked but it never arrived at the sensor (tray 3 pass-through). Paper source is undetermined.
200.91Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on.
422.13, 422.15Description: 422.13 The sensor (staple finisher rear tamper home) was not covered at the specified time. 422.15 The sensor (staple finisher rear tamper home) was not cleared within the specified time.
85Description: A developer unit end of life error was detected: • The developer unit life is low, nearly low, or very low. • The developer unit needs to be replaced.
172.80...172.85Description: 172.80 The LVPS fan did not turn on. 172.81 The LVPS fan did not turn off. 172.82 The LVPS fan speed did not ramp up to the required level. 172.83 The LVPS fan stalled. 172.84 The LVPS fan ran too slow. 172.85 The LVPS fan ran too fast.
243.x6Description: 243.46 Paper fed from tray 4 was picked but it never arrived at the sensor (tray 3 passthrough). 243.96 Paper was picked but it never arrived at the sensor (tray 3 pass-through). Paper source is undetermined.
200.91Description: 200.91 Paper remains detected at the sensor (input) after the printer is turned on.