These results are ranked by popularity.
Error | |
---|---|
32.40z...32.80' | Description: 32.40z Cartridge compatibility problem. Replace the unsupported black cartridge. 32.41z Cartridge compatibility problem. Replace the unsupported cyan cartridge. 32.42z Cartridge compatibility problem. Replace the unsupported magenta cartridg |
241.82, 241.83, 241.84 | Description: The motor (tray 1 pick) failed to achieve expected speed or has stalled |
200.x2, 200.x3 | Description: 200.12 Paper fed from tray 1 was detected earlier than expected at the sensor (input). 200.13 Paper fed from tray 1 never arrived at the sensor (input). 200.22 Paper fed from tray 2 was detected earlier than expected at the sensor (input). 2 |
85 | Description: 85.01 The black imaging unit is nearly low. The photoconductor threshold has been reached. 85.09 The black imaging unit is nearly low. The user.selected EWS set point has been reached. 85.11 The black imaging unit is low. The photoconductor |
230.x2 | Description: 230.12 Paper fed from tray 1 was detected earlier than expected at the sensor (duplex path 1). 230.22 Paper fed from tray 2 was detected earlier than expected at the sensor (duplex path 1). 230.32 Paper fed from tray 3 was detected earlier t |
The most common error codes.
Error | |
---|---|
32.40z...32.80' | Description: 32.40z Cartridge compatibility problem. Replace the unsupported black cartridge. 32.41z Cartridge compatibility problem. Replace the unsupported cyan cartridge. 32.42z Cartridge compatibility problem. Replace the unsupported magenta cartridg |
241.82, 241.83, 241.84 | Description: The motor (tray 1 pick) failed to achieve expected speed or has stalled |
200.x2, 200.x3 | Description: 200.12 Paper fed from tray 1 was detected earlier than expected at the sensor (input). 200.13 Paper fed from tray 1 never arrived at the sensor (input). 200.22 Paper fed from tray 2 was detected earlier than expected at the sensor (input). 2 |
85 | Description: 85.01 The black imaging unit is nearly low. The photoconductor threshold has been reached. 85.09 The black imaging unit is nearly low. The user.selected EWS set point has been reached. 85.11 The black imaging unit is low. The photoconductor |
230.x2 | Description: 230.12 Paper fed from tray 1 was detected earlier than expected at the sensor (duplex path 1). 230.22 Paper fed from tray 2 was detected earlier than expected at the sensor (duplex path 1). 230.32 Paper fed from tray 3 was detected earlier t |
32.40z...32.80' | Description: 32.40z Cartridge compatibility problem. Replace the unsupported black cartridge. 32.41z Cartridge compatibility problem. Replace the unsupported cyan cartridge. 32.42z Cartridge compatibility problem. Replace the unsupported magenta cartridg |
241.82, 241.83, 241.84 | Description: The motor (tray 1 pick) failed to achieve expected speed or has stalled |
200.x2, 200.x3 | Description: 200.12 Paper fed from tray 1 was detected earlier than expected at the sensor (input). 200.13 Paper fed from tray 1 never arrived at the sensor (input). 200.22 Paper fed from tray 2 was detected earlier than expected at the sensor (input). 2 |
85 | Description: 85.01 The black imaging unit is nearly low. The photoconductor threshold has been reached. 85.09 The black imaging unit is nearly low. The user.selected EWS set point has been reached. 85.11 The black imaging unit is low. The photoconductor |
230.x2 | Description: 230.12 Paper fed from tray 1 was detected earlier than expected at the sensor (duplex path 1). 230.22 Paper fed from tray 2 was detected earlier than expected at the sensor (duplex path 1). 230.32 Paper fed from tray 3 was detected earlier t |