Lexmark X945e Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X945e Top Searches

These results are ranked by popularity.

Error
984.00Description: Service finisher error Sensor (punch unit HP) on failure
80Description: Scheduled maintenance 100K kit 100K maintenance required Service is required to maintain printer performance.
941.01Description: Service tray 1 failure sensor (media level) late error (tray 1) The sensing area of the sensor (media level) in the media tray 1 is not interrupted within the specified time after the lift tray has risen to operating level.
294.00Description: Scanner jam Remove all originals from the scanner. Sensor (ADF inverter) static jam The system detected that the sensor (ADF inverter) is on.
905.03Description: Service engine error Marking device other1 error Internal processing error occurred in printer engine.

Lexmark X945e Common Errors

The most common error codes.

Error
984.00Description: Service finisher error Sensor (punch unit HP) on failure
80Description: Scheduled maintenance 100K kit 100K maintenance required Service is required to maintain printer performance.
941.01Description: Service tray 1 failure sensor (media level) late error (tray 1) The sensing area of the sensor (media level) in the media tray 1 is not interrupted within the specified time after the lift tray has risen to operating level.
294.00Description: Scanner jam Remove all originals from the scanner. Sensor (ADF inverter) static jam The system detected that the sensor (ADF inverter) is on.
905.03Description: Service engine error Marking device other1 error Internal processing error occurred in printer engine.
984.00Description: Service finisher error Sensor (punch unit HP) on failure
80Description: Scheduled maintenance 100K kit 100K maintenance required Service is required to maintain printer performance.
941.01Description: Service tray 1 failure sensor (media level) late error (tray 1) The sensing area of the sensor (media level) in the media tray 1 is not interrupted within the specified time after the lift tray has risen to operating level.
294.00Description: Scanner jam Remove all originals from the scanner. Sensor (ADF inverter) static jam The system detected that the sensor (ADF inverter) is on.
905.03Description: Service engine error Marking device other1 error Internal processing error occurred in printer engine.