Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X940e Top Searches

These results are ranked by popularity.

Error
34Description: Check tray 1 guides. Tray 1 media size mismatch error The media tray assembly 1 side guide or end guide is not properly set.
88Description: (Color) toner low (Color) toner cartridge nearly empty The (color) toner cartridge is nearing the replacement interval.
295.03Description: Scanner jam Remove all originals from the scanner. Too Short Size Jam The system detected a document with a length shorter than 115mm in the Slow Scan Direction.
243.02Description: Paper jam Check areas A, B Sensor (tray 2 feed-out) on jam (tray 3 media feed) The sensor (tray 2 feed-out) is not turned on within the specified time after the sensor (tray 3 feed-out) is turned on
290.00Description: Scanner jam Remove all originals from the scanner. Switch (sheet through) static jam The system detected that the sensor (sheet through) is on.

Lexmark X940e Common Errors

The most common error codes.

Error
34Description: Check tray 1 guides. Tray 1 media size mismatch error The media tray assembly 1 side guide or end guide is not properly set.
88Description: (Color) toner low (Color) toner cartridge nearly empty The (color) toner cartridge is nearing the replacement interval.
295.03Description: Scanner jam Remove all originals from the scanner. Too Short Size Jam The system detected a document with a length shorter than 115mm in the Slow Scan Direction.
243.02Description: Paper jam Check areas A, B Sensor (tray 2 feed-out) on jam (tray 3 media feed) The sensor (tray 2 feed-out) is not turned on within the specified time after the sensor (tray 3 feed-out) is turned on
290.00Description: Scanner jam Remove all originals from the scanner. Switch (sheet through) static jam The system detected that the sensor (sheet through) is on.
34Description: Check tray 1 guides. Tray 1 media size mismatch error The media tray assembly 1 side guide or end guide is not properly set.
88Description: (Color) toner low (Color) toner cartridge nearly empty The (color) toner cartridge is nearing the replacement interval.
295.03Description: Scanner jam Remove all originals from the scanner. Too Short Size Jam The system detected a document with a length shorter than 115mm in the Slow Scan Direction.
243.02Description: Paper jam Check areas A, B Sensor (tray 2 feed-out) on jam (tray 3 media feed) The sensor (tray 2 feed-out) is not turned on within the specified time after the sensor (tray 3 feed-out) is turned on
290.00Description: Scanner jam Remove all originals from the scanner. Switch (sheet through) static jam The system detected that the sensor (sheet through) is on.