These results are ranked by popularity.
Error | |
---|---|
845.00 | Description: Service scanner failure CCD failure A failure has occurred with the CCD sensor assembly. |
980.02 | Description: Service finisher error Printer engine card-finisher communication failure |
202.02 | Description: Paper jam Check area A Sensor (fuser exit) static jam Media remains on the sensor (fuser exit). |
84 | Description: Replace PC unit PC cartridge end of life The PC cartridge needs to be replaced. |
291.02 | Description: Scanner jam Remove all originals from the scanner. Sensor (ADF inverter) on jam 2 After the Read Speed Control operation started, the ADF registration motor turned on (CCW)), the sensor (ADF inverter) did not turn on within the specified tim |
The most common error codes.
Error | |
---|---|
845.00 | Description: Service scanner failure CCD failure A failure has occurred with the CCD sensor assembly. |
980.02 | Description: Service finisher error Printer engine card-finisher communication failure |
202.02 | Description: Paper jam Check area A Sensor (fuser exit) static jam Media remains on the sensor (fuser exit). |
84 | Description: Replace PC unit PC cartridge end of life The PC cartridge needs to be replaced. |
291.02 | Description: Scanner jam Remove all originals from the scanner. Sensor (ADF inverter) on jam 2 After the Read Speed Control operation started, the ADF registration motor turned on (CCW)), the sensor (ADF inverter) did not turn on within the specified tim |
845.00 | Description: Service scanner failure CCD failure A failure has occurred with the CCD sensor assembly. |
980.02 | Description: Service finisher error Printer engine card-finisher communication failure |
290.01 | Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim |
84 | Description: Replace PC unit PC cartridge end of life The PC cartridge needs to be replaced. |
244.01 | Description: Paper jam Check areas C, tray 4 Sensor (tray 3 feed-out) on jam (tray 4 media feed) The sensor (tray 3 feed-out) is not turned on within the specified time after the sensor (tray 4 feed-out) is turned on. |