Lexmark X860 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X860 Top Searches

These results are ranked by popularity.

Error
905.00Description: Service engine error NVM read/write cannot be executed failure Read/write of the NVM on the printer engine card assembly failed.
298.01Description: Scanner power cable missing or unplugged The scanner is not receiving input power.
842.04Description: Service scanner failure Scanner communication failure Controller detected a communication failure. Invalid message command.
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
244.05Description: Paper jam Check areas C, tray 4 Sensor (tray 4 feed-out) static jam Media remains on the sensor (tray 4 feed-out).

Lexmark X860 Common Errors

The most common error codes.

Error
905.00Description: Service engine error NVM read/write cannot be executed failure Read/write of the NVM on the printer engine card assembly failed.
298.01Description: Scanner power cable missing or unplugged The scanner is not receiving input power.
842.04Description: Service scanner failure Scanner communication failure Controller detected a communication failure. Invalid message command.
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
244.05Description: Paper jam Check areas C, tray 4 Sensor (tray 4 feed-out) static jam Media remains on the sensor (tray 4 feed-out).
905.00Description: Service engine error NVM read/write cannot be executed failure Read/write of the NVM on the printer engine card assembly failed.
298.01Description: Scanner power cable missing or unplugged The scanner is not receiving input power.
842.04Description: Service scanner failure Scanner communication failure Controller detected a communication failure. Invalid message command.
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
244.05Description: Paper jam Check areas C, tray 4 Sensor (tray 4 feed-out) static jam Media remains on the sensor (tray 4 feed-out).