These results are ranked by popularity.
Error | |
---|---|
843.21 | Description: Service scanner failure Scanner unit assembly EEPROM failure The scanner unit assembly EEPROM failed during the read/write operation. |
34 | Description: Incorrect media, check tray 1 guides. Tray 1 media size mismatch in length The media length detected by the sensor (registration) after the media is fed from media tray 1 does not match the length detected by media tray 1 switch (media size) |
290.01 | Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim |
956.02 | Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly. |
231.00 | Description: Paper jam Check areas n A, D Sensor (registration) on jam (duplex paper feed) Sensor (registration) is not turned on within the specified time after the duplex motor is turned on. |
The most common error codes.
Error | |
---|---|
843.21 | Description: Service scanner failure Scanner unit assembly EEPROM failure The scanner unit assembly EEPROM failed during the read/write operation. |
34 | Description: Incorrect media, check tray 1 guides. Tray 1 media size mismatch in length The media length detected by the sensor (registration) after the media is fed from media tray 1 does not match the length detected by media tray 1 switch (media size) |
290.01 | Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim |
956.02 | Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly. |
231.00 | Description: Paper jam Check areas n A, D Sensor (registration) on jam (duplex paper feed) Sensor (registration) is not turned on within the specified time after the duplex motor is turned on. |
843.21 | Description: Service scanner failure Scanner unit assembly EEPROM failure The scanner unit assembly EEPROM failed during the read/write operation. |
34 | Description: Incorrect media, check tray 1 guides. Tray 1 media size mismatch in length The media length detected by the sensor (registration) after the media is fed from media tray 1 does not match the length detected by media tray 1 switch (media size) |
290.01 | Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim |
956.02 | Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly. |
231.00 | Description: Paper jam Check areas n A, D Sensor (registration) on jam (duplex paper feed) Sensor (registration) is not turned on within the specified time after the duplex motor is turned on. |