Lexmark X852 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X852 Top Searches

These results are ranked by popularity.

Error
956.02Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly.
84Description: Replace PC unit PC cartridge end of life The PC cartridge needs to be replaced.
202.02Description: Paper jam Check area A Sensor (fuser exit) static jam Media remains on the sensor (fuser exit).
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
849.00Description: Service hard drive Hard drive/configuration ID mismatch The device does not have a hard drive installed, even though its configuration ID indicates that a hard drive should be present.

Lexmark X852 Common Errors

The most common error codes.

Error
956.02Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly.
84Description: Replace PC unit PC cartridge end of life The PC cartridge needs to be replaced.
202.02Description: Paper jam Check area A Sensor (fuser exit) static jam Media remains on the sensor (fuser exit).
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
849.00Description: Service hard drive Hard drive/configuration ID mismatch The device does not have a hard drive installed, even though its configuration ID indicates that a hard drive should be present.
956.02Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly.
84Description: Replace PC unit PC cartridge end of life The PC cartridge needs to be replaced.
202.02Description: Paper jam Check area A Sensor (fuser exit) static jam Media remains on the sensor (fuser exit).
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
849.00Description: Service hard drive Hard drive/configuration ID mismatch The device does not have a hard drive installed, even though its configuration ID indicates that a hard drive should be present.