These results are ranked by popularity.
Error | |
---|---|
924.00 | Description: Open fuser thermistor check Fuser type = 1 The fuser thermistor might be faulty. |
920.56 | Description: Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. The fuser hot roll temperature does not increase while the lamp is turned on. |
906.xx | Description: RIP interface driver error Code detected unusual event or timing. |
927.13 | Description: Print cartridge cooling fan control failure. The Print cartridge cooling fan does not reach the specified speed. |
958.xx | Description: NAND failure Printer has performed more than 100 "shift and reflash" operations as a result of ECC bit corrections |
The most common error codes.
Error | |
---|---|
924.00 | Description: Open fuser thermistor check Fuser type = 1 The fuser thermistor might be faulty. |
920.56 | Description: Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. The fuser hot roll temperature does not increase while the lamp is turned on. |
906.xx | Description: RIP interface driver error Code detected unusual event or timing. |
927.13 | Description: Print cartridge cooling fan control failure. The Print cartridge cooling fan does not reach the specified speed. |
958.xx | Description: NAND failure Printer has performed more than 100 "shift and reflash" operations as a result of ECC bit corrections |
924.00 | Description: Open fuser thermistor check Fuser type = 1 The fuser thermistor might be faulty. |
920.56 | Description: Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. The fuser hot roll temperature does not increase while the lamp is turned on. |
906.xx | Description: RIP interface driver error Code detected unusual event or timing. |
927.13 | Description: Print cartridge cooling fan control failure. The Print cartridge cooling fan does not reach the specified speed. |
958.xx | Description: NAND failure Printer has performed more than 100 "shift and reflash" operations as a result of ECC bit corrections |