These results are ranked by popularity.
| Error | |
|---|---|
| 920.32 | Description: Fuser warm-up failure Fuser type = 2 The fuser hot roll temperature is not maintained properly while the media in the fuser nip. |
| 927.05 | Description: Main cooling fan over speed failure. The main cooling fan does not reach the specified speed. |
| 31.05 | Description: Defective print cartridge or smart chip. Possible bad installation of smartchip or communication error with print cartridge ID connector assembly. |
| 922.53 | Description: Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. The fuser hot roll does reach the “final lamp detection” parameter but not in the specified time. |
| 843.xx | Description: Scanner carriage mechanical failure The scanner carriage home position detection has failed. |
The most common error codes.
| Error | |
|---|---|
| 920.32 | Description: Fuser warm-up failure Fuser type = 2 The fuser hot roll temperature is not maintained properly while the media in the fuser nip. |
| 927.05 | Description: Main cooling fan over speed failure. The main cooling fan does not reach the specified speed. |
| 31.05 | Description: Defective print cartridge or smart chip. Possible bad installation of smartchip or communication error with print cartridge ID connector assembly. |
| 922.53 | Description: Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. The fuser hot roll does reach the “final lamp detection” parameter but not in the specified time. |
| 843.xx | Description: Scanner carriage mechanical failure The scanner carriage home position detection has failed. |
| 920.32 | Description: Fuser warm-up failure Fuser type = 2 The fuser hot roll temperature is not maintained properly while the media in the fuser nip. |
| 927.05 | Description: Main cooling fan over speed failure. The main cooling fan does not reach the specified speed. |
| 31.05 | Description: Defective print cartridge or smart chip. Possible bad installation of smartchip or communication error with print cartridge ID connector assembly. |
| 922.53 | Description: Fuser warm-up failure Fuser type = 1 Fuser page count has exceeded life. The fuser hot roll does reach the “final lamp detection” parameter but not in the specified time. |
| 843.xx | Description: Scanner carriage mechanical failure The scanner carriage home position detection has failed. |
