Lexmark X651 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X651 Top Searches

These results are ranked by popularity.

Error
922.29Description: Fuser warm-up failure Fuser type = 2 The fuser hot roll has timed out and not reached “final lamp detection” during the specified time.
920.06Description: Fuser warm-up failure Fuser type = 1 The fuser hot roll temperature does not increase while the lamp is turned on.
32.04Description: Unsupported print cartridge. Incorrect data in smartchip.
950.xxDescription: NVRAM mismatch failure Mismatch between system card EEPROM and operator panel mirror. ".xx" codes: 00-29: mismatch between system and mirror 30-60: mismatch between secure and system
925.00Description: Incorrect fuser or fuser lamp detected. Fuser type = 1 The machine detected a 115 V lamp in a 220 V machine. The fuser lamp has an excessive wattage rating.

Lexmark X651 Common Errors

The most common error codes.

Error
922.29Description: Fuser warm-up failure Fuser type = 2 The fuser hot roll has timed out and not reached “final lamp detection” during the specified time.
920.06Description: Fuser warm-up failure Fuser type = 1 The fuser hot roll temperature does not increase while the lamp is turned on.
32.04Description: Unsupported print cartridge. Incorrect data in smartchip.
950.xxDescription: NVRAM mismatch failure Mismatch between system card EEPROM and operator panel mirror. ".xx" codes: 00-29: mismatch between system and mirror 30-60: mismatch between secure and system
925.00Description: Incorrect fuser or fuser lamp detected. Fuser type = 1 The machine detected a 115 V lamp in a 220 V machine. The fuser lamp has an excessive wattage rating.
922.29Description: Fuser warm-up failure Fuser type = 2 The fuser hot roll has timed out and not reached “final lamp detection” during the specified time.
920.06Description: Fuser warm-up failure Fuser type = 1 The fuser hot roll temperature does not increase while the lamp is turned on.
32.04Description: Unsupported print cartridge. Incorrect data in smartchip.
950.xxDescription: NVRAM mismatch failure Mismatch between system card EEPROM and operator panel mirror. ".xx" codes: 00-29: mismatch between system and mirror 30-60: mismatch between secure and system
925.00Description: Incorrect fuser or fuser lamp detected. Fuser type = 1 The machine detected a 115 V lamp in a 220 V machine. The fuser lamp has an excessive wattage rating.