These results are ranked by popularity.
| Error | |
|---|---|
| 957.00 | Description: System board This error indicates a system board processor failure. |
| 56.xx | Description: Parallel port [x] disabled |
| 901.xx | Description: Engine flash error Indicates that the flash which the system board code is programmed into is bad. Replace the system board. |
| 36.xx | Description: Resolution Reduced |
| 924.01...924.91 | Description: Open thermistor check failure. • Noisy thermistor signal. • Intermittent connection. • Thermistor cable not connected or thermistor actually open. |
The most common error codes.
| Error | |
|---|---|
| 957.00 | Description: System board This error indicates a system board processor failure. |
| 56.xx | Description: Parallel port [x] disabled |
| 901.xx | Description: Engine flash error Indicates that the flash which the system board code is programmed into is bad. Replace the system board. |
| 36.xx | Description: Resolution Reduced |
| 924.01...924.91 | Description: Open thermistor check failure. • Noisy thermistor signal. • Intermittent connection. • Thermistor cable not connected or thermistor actually open. |
| 957.00 | Description: System board This error indicates a system board processor failure. |
| 901.xx | Description: Engine flash error Indicates that the flash which the system board code is programmed into is bad. Replace the system board. |
| 36.xx | Description: Resolution Reduced |
| 56.xx | Description: Parallel port [x] disabled |
| 924.01...924.91 | Description: Open thermistor check failure. • Noisy thermistor signal. • Intermittent connection. • Thermistor cable not connected or thermistor actually open. |
