These results are ranked by popularity.
| Error | |
|---|---|
| 290.02...291.00 | Description: 290.02 Scanner ADF Feed Jam. The scanner ADF has failed to feed a page to the ADF interval sensor. 290.10 Scanner Static Jam - 1st scanner sensor. Scanner ADF detects paper at the first scanner sensor while the ADF is in an idle state. 291.0 |
| 200.33 | Description: Page from tray 1 did not reach the input sensor after multiple attempts. Page did make it out of the tray at least as far as the manual feeder sensor. Possible cause is that the page stalled at the alignment gate. |
| 927.00 | Description: Service fan error |
| 964.xx | Description: Download Emulation Cyclic Redundancy Check Error: checksum failure detected in the emulation header or emulation file. |
| 955.xx | Description: The code ROM or NAND flash failed the Cyclic Redundancy Check or the NAND experienced an uncorrectible multi-bit failure. |
The most common error codes.
| Error | |
|---|---|
| 290.02...291.00 | Description: 290.02 Scanner ADF Feed Jam. The scanner ADF has failed to feed a page to the ADF interval sensor. 290.10 Scanner Static Jam - 1st scanner sensor. Scanner ADF detects paper at the first scanner sensor while the ADF is in an idle state. 291.0 |
| 200.33 | Description: Page from tray 1 did not reach the input sensor after multiple attempts. Page did make it out of the tray at least as far as the manual feeder sensor. Possible cause is that the page stalled at the alignment gate. |
| 927.00 | Description: Service fan error |
| 964.xx | Description: Download Emulation Cyclic Redundancy Check Error: checksum failure detected in the emulation header or emulation file. |
| 955.xx | Description: The code ROM or NAND flash failed the Cyclic Redundancy Check or the NAND experienced an uncorrectible multi-bit failure. |
| 290.02...291.00 | Description: 290.02 Scanner ADF Feed Jam. The scanner ADF has failed to feed a page to the ADF interval sensor. 290.10 Scanner Static Jam - 1st scanner sensor. Scanner ADF detects paper at the first scanner sensor while the ADF is in an idle state. 291.0 |
| 200.33 | Description: Page from tray 1 did not reach the input sensor after multiple attempts. Page did make it out of the tray at least as far as the manual feeder sensor. Possible cause is that the page stalled at the alignment gate. |
| 927.00 | Description: Service fan error |
| 964.xx | Description: Download Emulation Cyclic Redundancy Check Error: checksum failure detected in the emulation header or emulation file. |
| 955.xx | Description: The code ROM or NAND flash failed the Cyclic Redundancy Check or the NAND experienced an uncorrectible multi-bit failure. |
