These results are ranked by popularity.
Error | |
---|---|
959.20...960.xx | Description: 959.20 Chipset hardware failure 959.21 Chipset did not respond to command request. 959.22 Challenge secret failure 959.23 Self test failed during initialization. 959.24 EEPROM retention error 959.25 Insufficient device space during HW prog 9 |
840.01, 840.02 | Description: 840.01 Scanner disabled Scanner disabled: the scanner is disabled and cannot be used. 840.02 Scanner auto disabled |
242.12 | Description: Second pick from manual feeder, tray 1, or feeder failed when media was in the source, other sheets were committed to the paper path. |
200.20 | Description: The media is too long over the manual feeder sensor. Possible causes include multi-sheet feed, media size (length) problem, pre-staged media in the tray. |
910.xx...914.01 | Description: 910.xx DC pick motor stall 911.xx DC pick motor excessive PWM 912.xx DC pick motor below speed 913.xx DC pick motor over speed 914.00 DC pick motor error 914.01 Lost encoder feedback |
The most common error codes.
Error | |
---|---|
959.20...960.xx | Description: 959.20 Chipset hardware failure 959.21 Chipset did not respond to command request. 959.22 Challenge secret failure 959.23 Self test failed during initialization. 959.24 EEPROM retention error 959.25 Insufficient device space during HW prog 9 |
840.01, 840.02 | Description: 840.01 Scanner disabled Scanner disabled: the scanner is disabled and cannot be used. 840.02 Scanner auto disabled |
242.12 | Description: Second pick from manual feeder, tray 1, or feeder failed when media was in the source, other sheets were committed to the paper path. |
200.20 | Description: The media is too long over the manual feeder sensor. Possible causes include multi-sheet feed, media size (length) problem, pre-staged media in the tray. |
910.xx...914.01 | Description: 910.xx DC pick motor stall 911.xx DC pick motor excessive PWM 912.xx DC pick motor below speed 913.xx DC pick motor over speed 914.00 DC pick motor error 914.01 Lost encoder feedback |
959.20...960.xx | Description: 959.20 Chipset hardware failure 959.21 Chipset did not respond to command request. 959.22 Challenge secret failure 959.23 Self test failed during initialization. 959.24 EEPROM retention error 959.25 Insufficient device space during HW prog 9 |
840.01, 840.02 | Description: 840.01 Scanner disabled Scanner disabled: the scanner is disabled and cannot be used. 840.02 Scanner auto disabled |
242.12 | Description: Second pick from manual feeder, tray 1, or feeder failed when media was in the source, other sheets were committed to the paper path. |
200.20 | Description: The media is too long over the manual feeder sensor. Possible causes include multi-sheet feed, media size (length) problem, pre-staged media in the tray. |
910.xx...914.01 | Description: 910.xx DC pick motor stall 911.xx DC pick motor excessive PWM 912.xx DC pick motor below speed 913.xx DC pick motor over speed 914.00 DC pick motor error 914.01 Lost encoder feedback |