Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X264dn Top Searches

These results are ranked by popularity.

Error
201.01Description: Transport motor identification failed to identify either motor after two tries.
954.xxDescription: NVRAM chip failure with system part.
54Description: Standard Network Software Error
200.14Description: Trailing edge cleared manual feed, but did not successfully debounce the sensor. Potential causes are a small gap or a bouncy manual feed sensor.
843.01Description: Scanner Failure: ADF mechanical failure

Lexmark X264dn Common Errors

The most common error codes.

Error
201.01Description: Transport motor identification failed to identify either motor after two tries.
954.xxDescription: NVRAM chip failure with system part.
54Description: Standard Network Software Error
200.14Description: Trailing edge cleared manual feed, but did not successfully debounce the sensor. Potential causes are a small gap or a bouncy manual feed sensor.
843.01Description: Scanner Failure: ADF mechanical failure
954.xxDescription: NVRAM chip failure with system part.
201.01Description: Transport motor identification failed to identify either motor after two tries.
54Description: Standard Network Software Error
200.14Description: Trailing edge cleared manual feed, but did not successfully debounce the sensor. Potential causes are a small gap or a bouncy manual feed sensor.
242.10Description: Second pick attempt failed from Tray 2