These results are ranked by popularity.
Error | |
---|---|
956.00 | Description: RIP card failure: processor failure |
201.03 | Description: Video never started on the page at the input sensor within two inches after hitting the input sensor |
294.04, 294.05, 294.06 | Description: 294.04 Scanner jam, remove all originals from the scanner. Jam at the ADF exit sensor. 294.05 Scanner jam, remove all originals from the scanner. A jam is detected at the ADF exit sensor. 294.06 ADF Backfeed Jam. A jam is detected at the ADF |
58 | Description: Too Many Trays Attached |
200.01 | Description: Classic input jam. The media is too long over the input sensor. Possible causes include multi-sheet feed, tray size sensing problem, and media slippage. |
The most common error codes.
Error | |
---|---|
956.00 | Description: RIP card failure: processor failure |
201.03 | Description: Video never started on the page at the input sensor within two inches after hitting the input sensor |
294.04, 294.05, 294.06 | Description: 294.04 Scanner jam, remove all originals from the scanner. Jam at the ADF exit sensor. 294.05 Scanner jam, remove all originals from the scanner. A jam is detected at the ADF exit sensor. 294.06 ADF Backfeed Jam. A jam is detected at the ADF |
58 | Description: Too Many Trays Attached |
200.01 | Description: Classic input jam. The media is too long over the input sensor. Possible causes include multi-sheet feed, tray size sensing problem, and media slippage. |
956.00 | Description: RIP card failure: processor failure |
201.03 | Description: Video never started on the page at the input sensor within two inches after hitting the input sensor |
294.04, 294.05, 294.06 | Description: 294.04 Scanner jam, remove all originals from the scanner. Jam at the ADF exit sensor. 294.05 Scanner jam, remove all originals from the scanner. A jam is detected at the ADF exit sensor. 294.06 ADF Backfeed Jam. A jam is detected at the ADF |
58 | Description: Too Many Trays Attached |
200.01 | Description: Classic input jam. The media is too long over the input sensor. Possible causes include multi-sheet feed, tray size sensing problem, and media slippage. |