Lexmark X204 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X204 Top Searches

These results are ranked by popularity.

Error
950.xxDescription: Mismatch between EEPROM and mirror memory Note: A new controller board or operator panel has been installed, and has not been properly prepared for this use. Install a new note. Do not install both the controller board and the operator panel
38Description: Memory Full
984.xx...991.xxDescription: 984.xx Invalid command parameter received by the specidied device 990.xx An equipment check condition has occurred in the specified device, but the device is unable to identify the exact component failure. 991.xx The specified device has det
840.01, 840.02Description: 840.01 Scanner disabled The scanner is disabled and can’t be used. 840.02 Scanner auto disabled The scanner is disabled and can’t be used.
201Description: Paper Jam Remove Cartridge

Lexmark X204 Common Errors

The most common error codes.

Error
950.xxDescription: Mismatch between EEPROM and mirror memory Note: A new controller board or operator panel has been installed, and has not been properly prepared for this use. Install a new note. Do not install both the controller board and the operator panel
38Description: Memory Full
984.xx...991.xxDescription: 984.xx Invalid command parameter received by the specidied device 990.xx An equipment check condition has occurred in the specified device, but the device is unable to identify the exact component failure. 991.xx The specified device has det
840.01, 840.02Description: 840.01 Scanner disabled The scanner is disabled and can’t be used. 840.02 Scanner auto disabled The scanner is disabled and can’t be used.
201Description: Paper Jam Remove Cartridge
950.xxDescription: Mismatch between EEPROM and mirror memory Note: A new controller board or operator panel has been installed, and has not been properly prepared for this use. Install a new note. Do not install both the controller board and the operator panel
38Description: Memory Full
984.xx...991.xxDescription: 984.xx Invalid command parameter received by the specidied device 990.xx An equipment check condition has occurred in the specified device, but the device is unable to identify the exact component failure. 991.xx The specified device has det
840.01, 840.02Description: 840.01 Scanner disabled The scanner is disabled and can’t be used. 840.02 Scanner auto disabled The scanner is disabled and can’t be used.
201Description: Paper Jam Remove Cartridge