Lexmark MX912 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MX912 Top Searches

These results are ranked by popularity.

Error
50Description: PPDS encountered a font error.
189.01...189.64Description: 189.01 The expansion controller board communication failed. 189.61 The staple, hole punch finisher communication failed. 189.61 The staple finisher communication failed. 189.63 The horizontal paper transport communication failed. 189.64 The
61, 62Description: 61 The hard disk is defective. 62 The hard disk is full.
196.60...196.63Description: 196.60 Communication error occurred between the induction heater and the controller board. 196.61 The induction heater monitor malfunctioned. 196.62 The power supplied to the induction heater is abnormal. 196.63 The voltage supplied to the i
121.02...121.70Description: 121.02 The fuser temperature did not reach the required level during warm-up. 121.60 The fuser thermistor (main) was not detected. 121.61 The fuser temperature (main) did not reach the required level. 121.62 The fuser temperature (main) went

Lexmark MX912 Common Errors

The most common error codes.

Error
50Description: PPDS encountered a font error.
189.01...189.64Description: 189.01 The expansion controller board communication failed. 189.61 The staple, hole punch finisher communication failed. 189.61 The staple finisher communication failed. 189.63 The horizontal paper transport communication failed. 189.64 The
61, 62Description: 61 The hard disk is defective. 62 The hard disk is full.
196.60...196.63Description: 196.60 Communication error occurred between the induction heater and the controller board. 196.61 The induction heater monitor malfunctioned. 196.62 The power supplied to the induction heater is abnormal. 196.63 The voltage supplied to the i
121.02...121.70Description: 121.02 The fuser temperature did not reach the required level during warm-up. 121.60 The fuser thermistor (main) was not detected. 121.61 The fuser temperature (main) did not reach the required level. 121.62 The fuser temperature (main) went
50Description: PPDS encountered a font error.
189.01...189.64Description: 189.01 The expansion controller board communication failed. 189.61 The staple, hole punch finisher communication failed. 189.61 The staple finisher communication failed. 189.63 The horizontal paper transport communication failed. 189.64 The
61, 62Description: 61 The hard disk is defective. 62 The hard disk is full.
196.60...196.63Description: 196.60 Communication error occurred between the induction heater and the controller board. 196.61 The induction heater monitor malfunctioned. 196.62 The power supplied to the induction heater is abnormal. 196.63 The voltage supplied to the i
121.02...121.70Description: 121.02 The fuser temperature did not reach the required level during warm-up. 121.60 The fuser thermistor (main) was not detected. 121.61 The fuser temperature (main) did not reach the required level. 121.62 The fuser temperature (main) went