These results are ranked by popularity.
| Error | |
|---|---|
| 56 | Description: The parallel port, serial port, or standard USB port is disabled. |
| 192.10 | Description: The tray 2 lift plate did not move to the correct position. |
| 241.11, 241.91 | Description: 241.11 The paper remains detected at the sensor (tray 1 feed) after the printer is turned on. 241.91 The paper remains detected at the sensor (tray 1 feed) after the printer is turned on. |
| 163.04 | Description: The motor (tray 3 feed) did not reach the required speed. |
| 800.25 | Description: The CCD power supply malfunctioned. |
The most common error codes.
| Error | |
|---|---|
| 56 | Description: The parallel port, serial port, or standard USB port is disabled. |
| 192.10 | Description: The tray 2 lift plate did not move to the correct position. |
| 241.11, 241.91 | Description: 241.11 The paper remains detected at the sensor (tray 1 feed) after the printer is turned on. 241.91 The paper remains detected at the sensor (tray 1 feed) after the printer is turned on. |
| 163.04 | Description: The motor (tray 3 feed) did not reach the required speed. |
| 800.25 | Description: The CCD power supply malfunctioned. |
| 56 | Description: The parallel port, serial port, or standard USB port is disabled. |
| 192.10 | Description: The tray 2 lift plate did not move to the correct position. |
| 241.11, 241.91 | Description: 241.11 The paper remains detected at the sensor (tray 1 feed) after the printer is turned on. 241.91 The paper remains detected at the sensor (tray 1 feed) after the printer is turned on. |
| 163.04 | Description: The motor (tray 3 feed) did not reach the required speed. |
| 800.25 | Description: The CCD power supply malfunctioned. |
