These results are ranked by popularity.
Error | |
---|---|
202.01 | Description: Media remains on the sensor (fuser exit) during the warm.up sequence |
120.10...120.80 | Description: 120.10 Fuser drive Motor Halls detection error 120.20 Fuser drive Motor took too long to stop 120.30 Fuser drive Motor Unable To Lock (before motor ID) 120.40 Fuser drive motor over.speed error 120.60 Fuser drive motor unable to lock (after |
845.02, 845.03 | Description: 845.02 An error has occurred during the initialization process with the flatbed scanner CCD. 845.03 An error has occurred during the initialization process with the ADF scanner CCD. |
295.20 | Description: Sensor (multifeed detect) detected more than one page in the path at a time. |
955.xx | Description: The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC) or the NAND experienced an uncorrectable multi-bit failure |
The most common error codes.
Error | |
---|---|
202.01 | Description: Media remains on the sensor (fuser exit) during the warm.up sequence |
120.10...120.80 | Description: 120.10 Fuser drive Motor Halls detection error 120.20 Fuser drive Motor took too long to stop 120.30 Fuser drive Motor Unable To Lock (before motor ID) 120.40 Fuser drive motor over.speed error 120.60 Fuser drive motor unable to lock (after |
845.02, 845.03 | Description: 845.02 An error has occurred during the initialization process with the flatbed scanner CCD. 845.03 An error has occurred during the initialization process with the ADF scanner CCD. |
295.20 | Description: Sensor (multifeed detect) detected more than one page in the path at a time. |
955.xx | Description: The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC) or the NAND experienced an uncorrectable multi-bit failure |
202.01 | Description: Media remains on the sensor (fuser exit) during the warm.up sequence |
120.10...120.80 | Description: 120.10 Fuser drive Motor Halls detection error 120.20 Fuser drive Motor took too long to stop 120.30 Fuser drive Motor Unable To Lock (before motor ID) 120.40 Fuser drive motor over.speed error 120.60 Fuser drive motor unable to lock (after |
845.02, 845.03 | Description: 845.02 An error has occurred during the initialization process with the flatbed scanner CCD. 845.03 An error has occurred during the initialization process with the ADF scanner CCD. |
295.20 | Description: Sensor (multifeed detect) detected more than one page in the path at a time. |
955.xx | Description: The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC) or the NAND experienced an uncorrectable multi-bit failure |