Lexmark MX511dhe Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MX511dhe Top Searches

These results are ranked by popularity.

Error
31.21...31.25Description: 31.21 Capactive Toner Level Sensing (CTLS) reading out of range. 31.22 Excessive CTLS noise. 31.23 Abrupt change detected in CTLS reading. 31.25 CTLS calibration capacitor reading is too low
957.xxDescription: Service Controller Board Controller board failure. ASIC failure.
331.51...331.53Description: 331.51 Motor 1 (Pick/Lift) motor no first encoder 331.52 Motor 1 (Pick/Lift) motor stop error 331.53 Motor 1 (Pick/Lift) PWM underflow (motor overspeed)
981.xxDescription: Engine protocol violation detected by the specified device
126.01, 126.02Description: 126.01 Line frequency outside operating range of device. 126.02 No line frequency detected.

Lexmark MX511dhe Common Errors

The most common error codes.

Error
31.21...31.25Description: 31.21 Capactive Toner Level Sensing (CTLS) reading out of range. 31.22 Excessive CTLS noise. 31.23 Abrupt change detected in CTLS reading. 31.25 CTLS calibration capacitor reading is too low
957.xxDescription: Service Controller Board Controller board failure. ASIC failure.
331.51...331.53Description: 331.51 Motor 1 (Pick/Lift) motor no first encoder 331.52 Motor 1 (Pick/Lift) motor stop error 331.53 Motor 1 (Pick/Lift) PWM underflow (motor overspeed)
981.xxDescription: Engine protocol violation detected by the specified device
126.01, 126.02Description: 126.01 Line frequency outside operating range of device. 126.02 No line frequency detected.
31.21...31.25Description: 31.21 Capactive Toner Level Sensing (CTLS) reading out of range. 31.22 Excessive CTLS noise. 31.23 Abrupt change detected in CTLS reading. 31.25 CTLS calibration capacitor reading is too low
957.xxDescription: Service Controller Board Controller board failure. ASIC failure.
331.51...331.53Description: 331.51 Motor 1 (Pick/Lift) motor no first encoder 331.52 Motor 1 (Pick/Lift) motor stop error 331.53 Motor 1 (Pick/Lift) PWM underflow (motor overspeed)
981.xxDescription: Engine protocol violation detected by the specified device
126.01, 126.02Description: 126.01 Line frequency outside operating range of device. 126.02 No line frequency detected.