Lexmark MX510de Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MX510de Top Searches

These results are ranked by popularity.

Error
325.60...325.63Description: 325.60 Hardware error—Board ID unknown 325.61 Hardware error—Option type unknown 325.62 Hardware error—Product ID unknown 325.63 Hardware error—Sensors are not plugged on the board.
121.07...121.37Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can ocurr in printing or stand
953.xxDescription: Service NVRAM Failure NVRAM chip failure with mirror.
976.xxDescription: 976.xx Service Standard Network or 976.xx Service Network Card x Unrecoverable software or error in network or network card x.
979.xxDescription: 979.xx Service Standard Network or 979.xx Service Network Card x Flash parts failed while programming the Standard Network or Network Card x port.

Lexmark MX510de Common Errors

The most common error codes.

Error
325.60...325.63Description: 325.60 Hardware error—Board ID unknown 325.61 Hardware error—Option type unknown 325.62 Hardware error—Product ID unknown 325.63 Hardware error—Sensors are not plugged on the board.
121.07...121.37Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can ocurr in printing or stand
953.xxDescription: Service NVRAM Failure NVRAM chip failure with mirror.
976.xxDescription: 976.xx Service Standard Network or 976.xx Service Network Card x Unrecoverable software or error in network or network card x.
979.xxDescription: 979.xx Service Standard Network or 979.xx Service Network Card x Flash parts failed while programming the Standard Network or Network Card x port.
325.60...325.63Description: 325.60 Hardware error—Board ID unknown 325.61 Hardware error—Option type unknown 325.62 Hardware error—Product ID unknown 325.63 Hardware error—Sensors are not plugged on the board.
121.07...121.37Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can ocurr in printing or stand
953.xxDescription: Service NVRAM Failure NVRAM chip failure with mirror.
976.xxDescription: 976.xx Service Standard Network or 976.xx Service Network Card x Unrecoverable software or error in network or network card x.
979.xxDescription: 979.xx Service Standard Network or 979.xx Service Network Card x Flash parts failed while programming the Standard Network or Network Card x port.