Lexmark MX510 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MX510 Top Searches

These results are ranked by popularity.

Error
975.xxDescription: 975.xx Service Standard Network or 975.xx Service Network Card x Network error: unrecognizable network port.
335.60...335.63Description: 335.61 Hardware error—Option type unknown 335.62 Hardware error—Product ID unknown 335.63 Hardware error—Sensors are not plugged on the board.
140.10...140.80Description: 140.10 Transport motor halls not detected. 140.20 Transport motor took too long to stop. 140.30 Transport motor unable to lock (before motor ID). 140.40 Transport motor overspeed detected. 140.60 Transport motor unable to lock (after motor I
840.01, 840.02, 840.03Description: The scanner is disabled and can’t be used.
200.38, 200.42, 200.44, 200.45Description: 200.38 Interpage servo gap smaller than expected for galvo offset target evaluation. 200.42 Rogue sheet at ACM sensor while flushing the paper path prior to declaring tray 1 source empty. 200.44 Page from tray 1 did not reach the input senso

Lexmark MX510 Common Errors

The most common error codes.

Error
975.xxDescription: 975.xx Service Standard Network or 975.xx Service Network Card x Network error: unrecognizable network port.
335.60...335.63Description: 335.61 Hardware error—Option type unknown 335.62 Hardware error—Product ID unknown 335.63 Hardware error—Sensors are not plugged on the board.
140.10...140.80Description: 140.10 Transport motor halls not detected. 140.20 Transport motor took too long to stop. 140.30 Transport motor unable to lock (before motor ID). 140.40 Transport motor overspeed detected. 140.60 Transport motor unable to lock (after motor I
840.01, 840.02, 840.03Description: The scanner is disabled and can’t be used.
200.38, 200.42, 200.44, 200.45Description: 200.38 Interpage servo gap smaller than expected for galvo offset target evaluation. 200.42 Rogue sheet at ACM sensor while flushing the paper path prior to declaring tray 1 source empty. 200.44 Page from tray 1 did not reach the input senso
975.xxDescription: 975.xx Service Standard Network or 975.xx Service Network Card x Network error: unrecognizable network port.
335.60...335.63Description: 335.61 Hardware error—Option type unknown 335.62 Hardware error—Product ID unknown 335.63 Hardware error—Sensors are not plugged on the board.
140.10...140.80Description: 140.10 Transport motor halls not detected. 140.20 Transport motor took too long to stop. 140.30 Transport motor unable to lock (before motor ID). 140.40 Transport motor overspeed detected. 140.60 Transport motor unable to lock (after motor I
840.01, 840.02, 840.03Description: The scanner is disabled and can’t be used.
200.38, 200.42, 200.44, 200.45Description: 200.38 Interpage servo gap smaller than expected for galvo offset target evaluation. 200.42 Rogue sheet at ACM sensor while flushing the paper path prior to declaring tray 1 source empty. 200.44 Page from tray 1 did not reach the input senso