Lexmark MX410 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MX410 Top Searches

These results are ranked by popularity.

Error
950.xxDescription: NVRAM mismatch failure—mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29— mismatch between system and mirror • 30-60—mismatch between secure and system
31.46Description: Toner failed to replenish into the imaging unit
964.xxDescription: Service Emulation Error Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file.
334.57, 334.58, 334.59Description: 334.57 Motor 3 motor no first encoder 334.58 Motor 3 motor stop error 334.59 Motor 3 PWM underflow (motor overspeed)
133.05...133.08Description: 133.05 CTLS reading above maximum expected value. 133.06 CTLS reading below minimum expected value. 133.08 Excessive CTLS noise.

Lexmark MX410 Common Errors

The most common error codes.

Error
950.xxDescription: NVRAM mismatch failure—mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29— mismatch between system and mirror • 30-60—mismatch between secure and system
31.46Description: Toner failed to replenish into the imaging unit
964.xxDescription: Service Emulation Error Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file.
334.57, 334.58, 334.59Description: 334.57 Motor 3 motor no first encoder 334.58 Motor 3 motor stop error 334.59 Motor 3 PWM underflow (motor overspeed)
133.05...133.08Description: 133.05 CTLS reading above maximum expected value. 133.06 CTLS reading below minimum expected value. 133.08 Excessive CTLS noise.
950.xxDescription: NVRAM mismatch failure—mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29— mismatch between system and mirror • 30-60—mismatch between secure and system
31.46Description: Toner failed to replenish into the imaging unit
964.xxDescription: Service Emulation Error Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file.
334.57, 334.58, 334.59Description: 334.57 Motor 3 motor no first encoder 334.58 Motor 3 motor stop error 334.59 Motor 3 PWM underflow (motor overspeed)
133.05...133.08Description: 133.05 CTLS reading above maximum expected value. 133.06 CTLS reading below minimum expected value. 133.08 Excessive CTLS noise.