Lexmark MS911 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MS911 Top Searches

These results are ranked by popularity.

Error
600.00...600.10Description: 600.00 The image was not ready during a print job from the MPF. 600.01 The image was not ready during a print job from tray 1. 600.02 The image was not ready during a print job from tray 2. 600.03 The image was not ready during a print job f
196.11Description: The 2500-sheet tray transfer guide did not move to the correct position.
120.00, 120.06Description: 120.00 The motor (fuser) did not run. 120.06 The motor (fuser) did not run at the correct timing.
820...824.01Description: 820 Scanner lamp exposure did not reach the required level 820.01 Scanner lamp exposure went over the required level. 824 The sensor (scanner lamp home) did not detect the scanner lamp at its home position. 824.01 The scanner lamp remains de
242.93Description: The sensor (tray 2 transport) did not detect the paper from the 3000.sheet tray.

Lexmark MS911 Common Errors

The most common error codes.

Error
600.00...600.10Description: 600.00 The image was not ready during a print job from the MPF. 600.01 The image was not ready during a print job from tray 1. 600.02 The image was not ready during a print job from tray 2. 600.03 The image was not ready during a print job f
196.11Description: The 2500-sheet tray transfer guide did not move to the correct position.
120.00, 120.06Description: 120.00 The motor (fuser) did not run. 120.06 The motor (fuser) did not run at the correct timing.
820...824.01Description: 820 Scanner lamp exposure did not reach the required level 820.01 Scanner lamp exposure went over the required level. 824 The sensor (scanner lamp home) did not detect the scanner lamp at its home position. 824.01 The scanner lamp remains de
242.93Description: The sensor (tray 2 transport) did not detect the paper from the 3000.sheet tray.
600.00...600.10Description: 600.00 The image was not ready during a print job from the MPF. 600.01 The image was not ready during a print job from tray 1. 600.02 The image was not ready during a print job from tray 2. 600.03 The image was not ready during a print job f
196.11Description: The 2500-sheet tray transfer guide did not move to the correct position.
120.00, 120.06Description: 120.00 The motor (fuser) did not run. 120.06 The motor (fuser) did not run at the correct timing.
820...824.01Description: 820 Scanner lamp exposure did not reach the required level 820.01 Scanner lamp exposure went over the required level. 824 The sensor (scanner lamp home) did not detect the scanner lamp at its home position. 824.01 The scanner lamp remains de
242.93Description: The sensor (tray 2 transport) did not detect the paper from the 3000.sheet tray.