These results are ranked by popularity.
Error | |
---|---|
285.01 | Description: Media remains on the sensor (ADF media exit) during the warm-up sequence or at POR. |
940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
130.01 | Description: Transfer servo error |
202.28 | Description: The sensor (fuser exit) rebounded upon being released by the trailing edge of the media |
50 | Description: The PPDS interpreter has encountered a font error |
The most common error codes.
Error | |
---|---|
285.01 | Description: Media remains on the sensor (ADF media exit) during the warm-up sequence or at POR. |
940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
130.01 | Description: Transfer servo error |
202.28 | Description: The sensor (fuser exit) rebounded upon being released by the trailing edge of the media |
50 | Description: The PPDS interpreter has encountered a font error |
285.01 | Description: Media remains on the sensor (ADF media exit) during the warm-up sequence or at POR. |
940.xx | Description: RIP to engine communication failure—the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed. |
130.01 | Description: Transfer servo error |
202.28 | Description: The sensor (fuser exit) rebounded upon being released by the trailing edge of the media |
50 | Description: The PPDS interpreter has encountered a font error |