Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MS711dn Top Searches

These results are ranked by popularity.

Error
949.xxDescription: Failed engine card—delay line calibration failure.
31.60...31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6
202.01Description: Media remains on the sensor (narrow media) during the warm.up sequence
52Description: Flash full
202.49Description: Fuser info chip error

Lexmark MS711dn Common Errors

The most common error codes.

Error
949.xxDescription: Failed engine card—delay line calibration failure.
31.60...31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6
202.01Description: Media remains on the sensor (narrow media) during the warm.up sequence
52Description: Flash full
202.49Description: Fuser info chip error
31.60...31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6
202.01Description: Media remains on the sensor (narrow media) during the warm.up sequence
949.xxDescription: Failed engine card—delay line calibration failure.
202.49Description: Fuser info chip error
133.05...133.08Description: 133.05 Toner Level Sensing reading above maximum expected value 133.06 Toner Level Sensing reading below minimum expected value 133.07 Toner failed to replenish into the Imaging Unit 133.08 Excessive toner level sensing noise