These results are ranked by popularity.
| Error | |
|---|---|
| 202.01 | Description: Media remains on the sensor (narrow media) during the warm.up sequence |
| 949.xx | Description: Failed engine card—delay line calibration failure. |
| 31.60...31.65 | Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6 |
| 202.49 | Description: Fuser info chip error |
| 133.05...133.08 | Description: 133.05 Toner Level Sensing reading above maximum expected value 133.06 Toner Level Sensing reading below minimum expected value 133.07 Toner failed to replenish into the Imaging Unit 133.08 Excessive toner level sensing noise |
The most common error codes.
| Error | |
|---|---|
| 202.01 | Description: Media remains on the sensor (narrow media) during the warm.up sequence |
| 949.xx | Description: Failed engine card—delay line calibration failure. |
| 31.60...31.65 | Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6 |
| 202.49 | Description: Fuser info chip error |
| 133.05...133.08 | Description: 133.05 Toner Level Sensing reading above maximum expected value 133.06 Toner Level Sensing reading below minimum expected value 133.07 Toner failed to replenish into the Imaging Unit 133.08 Excessive toner level sensing noise |
| 202.01 | Description: Media remains on the sensor (narrow media) during the warm.up sequence |
| 31.60...31.65 | Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6 |
| 949.xx | Description: Failed engine card—delay line calibration failure. |
| 52 | Description: Flash full |
| 133.05...133.08 | Description: 133.05 Toner Level Sensing reading above maximum expected value 133.06 Toner Level Sensing reading below minimum expected value 133.07 Toner failed to replenish into the Imaging Unit 133.08 Excessive toner level sensing noise |
