Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MS710dn Top Searches

These results are ranked by popularity.

Error
842.xxDescription: A communication failure has occurred between the controller and the ADF/scanner.
200.13Description: The page at the sensor (input) is not the next page to be imaged.
282.05Description: Media reached the sensor (ADF pick) but is late leaving or does not clear it within the specified time.
111.30...111.90Description: 111.30 Printhead ID error 111.31 Printhead no first HSYNC error 111.32 Printhead loss of HSYNC error 111.33 Printhead loss of HSYNC during servo 111.34 Printhead mirror motor loss of lock 111.35 Printhead mirror motor initial lock 111.36 Pri
31.80...31.85Description: 31.80 Fuser smart chip error 31.81 Fuser I2C packet time-out 31.82 Fuser I2C packet has been sent but code timed out on receiving the data (callback) 31.83 Fuser security error in the send challenge sequence 31.84 Fuser ROM signature error 3

Lexmark MS710dn Common Errors

The most common error codes.

Error
842.xxDescription: A communication failure has occurred between the controller and the ADF/scanner.
200.13Description: The page at the sensor (input) is not the next page to be imaged.
282.05Description: Media reached the sensor (ADF pick) but is late leaving or does not clear it within the specified time.
111.30...111.90Description: 111.30 Printhead ID error 111.31 Printhead no first HSYNC error 111.32 Printhead loss of HSYNC error 111.33 Printhead loss of HSYNC during servo 111.34 Printhead mirror motor loss of lock 111.35 Printhead mirror motor initial lock 111.36 Pri
31.80...31.85Description: 31.80 Fuser smart chip error 31.81 Fuser I2C packet time-out 31.82 Fuser I2C packet has been sent but code timed out on receiving the data (callback) 31.83 Fuser security error in the send challenge sequence 31.84 Fuser ROM signature error 3
200.13Description: The page at the sensor (input) is not the next page to be imaged.
282.05Description: Media reached the sensor (ADF pick) but is late leaving or does not clear it within the specified time.
842.xxDescription: A communication failure has occurred between the controller and the ADF/scanner.
31.80...31.85Description: 31.80 Fuser smart chip error 31.81 Fuser I2C packet time-out 31.82 Fuser I2C packet has been sent but code timed out on receiving the data (callback) 31.83 Fuser security error in the send challenge sequence 31.84 Fuser ROM signature error 3
955.xxDescription: The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC) or the NAND experienced an uncorrectable multi-bit failure